| Part |
 |
|
|
Plug |
Part No. |
|
| MEDIACLAVE 10 |
 |
10 Litres Media Preparator complete with cuvette, lid seal,
magnetic stirrer, decanting tubing, fitting for dispensing
tubing, integrated printer and printer splash guard
(200-240 V, 50/60 Hz) |
|
EU (CEE 7/7) |
136 000 |
|
US (NEMA L6-30P) |
136 010 |
|
no plug |
136 020 |
|
MEDIACLAVE 10
without printer |
 |
10 Litres Media Preparator complete with cuvette, lid seal,
magnetic stirrer, decanting tubing and fitting for
dispensing tubing
(200-240 V, 50/60 Hz) |
|
EU (CEE 7/7) |
136 005 |
|
US (NEMA L6-30P) |
136 015 |
|
no plug |
136 025 |
|
| |
|
|
|
Voltage |
Part No. |
|
MEDIACLAVE 30
|
 |
30 Litres Media Preparator complete with cuvette, lid seal,
magnetic stirrer, decanting tubing, fitting for dispensing
tubing, integrated printer and printer splash guard
(Without plug) |
|
3 x 200-208 V
50/60 Hz (US, JP) |
136 050 |
|
3 x 400 V
50/60 Hz (EU) |
136 055 |
|
| |
|
|
|
|
|
| Accessories |
|
|
|
MEDIACLAVE |
Part No. |
|
| Stainless steel cuvette |
 |
for medium sterilisation |
|
10 |
136 030 |
|
| for medium sterilisation, incl. stainless steel guide tube |
|
30 |
136 060 |
|
| Autoclave kit |
 |
for autoclaving/thermostatting liquids in containers, incl. autoclave cuvette, stainless steel with grid insert and flexible temperature probe |
|
10 |
136 070 |
|
| Magnetic stirrer bar |
 |
for homogeneous medium mixing within the cuvette |
|
10 |
132 130 |
|
| Magnetic stirrer bar with paddle |
 |
for MEDIACLAVE 30 or homogeneous stirring of high viscosity agar media with MEDIACLAVE 10 |
|
10 + 30 |
136 075 |
|
| Decanting tubing |
 |
for insertion into the sterilisation chamber/ cuvette for dispensing, incl. silicone tubing, stainless steel nozzle and securing nut |
|
10 |
136 034 |
|
| for insertion into the sterilisation chamber/ cuvette for dispensing, incl. rigid stainless steel tube (length 613 mm), silicone tubing and securing nut |
|
30 |
136 061 |
|
| Fitting for dispensing tubing |
 |
for connecting tubing (inner diameter 6 mm) to dispense port, incl. stainless dispense port fitting and spring |
|
10 + 30 |
136 035 |
|
| Printer splash guard |
 |
for protecting the integrated printer from splashes |
|
10 + 30 |
136 040 |
|
Tubing connector
for adding port |
 |
for adding large volumes of supplements through the adding port using a silicone tubing (inner diameter 6 mm) |
|
10 + 30 |
136 049 |
|
| Injection lid |
 |
for sterile injection of supplements through the adding port, incl. cap, punched disc and septum membrane (silicone/PTFE) |
|
10 + 30 |
136 247 |
|
| Pressure dispensing kit |
 |
for direct pressure dispensing, incl. pinch valve box, foot switch,
silicone tubing and stainless steel dispensing tube |
|
10 + 30 |
136 064 |
|
| Dispensing tube |
 |
for pressure dispensing, length 10 cm, stainless steel, one end dented |
|
10 + 30 |
171 056 |
|
Foot switch w.
connecting cable |
 |
for pressure dispensing, to trigger the pinch valve |
|
10 + 30 |
143 200 |
|
| Volume measuring stick |
 |
for convenient measurement of the product volume in the cuvette |
|
30 |
136 565 |
|
| |
|
|
|
|
|
| Consumables |
|
|
|
MEDIACLAVE |
Part No. |
|
| Lid seal |
 |
for sealing the vessel lid, silicone |
|
10 + 30 |
135 860 |
|
| Septum membrane |
 |
for injection lid, silicone/PTFE, self-resealing, 10-pack |
|
10 + 30 |
136 047 |
|
| Paper rolls |
 |
for integrated dot matrix printer, 10-pack |
|
10 + 30 |
136 038 |
|
| Ink ribbon |
 |
for integrated dot matrix printer |
|
10 + 30 |
136 901 |
|
| Silicone tubing |
 |
for pressure dispensing, length 25 m (bulk roll),
inner diameter 6 mm, autoclavable |
|
10 + 30 |
171 036 |
|
| |
