Note: The TECNOMAT system is discontinued and replaced by the new MEDIAJET system.
Only accessories are available as indicated below.
|
|
| 1 Filling unit |
| |
|
|
|
| Accessories |
Delivery table for filling unit only, single
unit, Standard 65 x 50 mm |
102 105 |
| |
|
| Double tubing set (tube 8 x12 mm) with
borosilicate glass Y-pieces, including filling nozzle
|
101 015 |
| |
|
| Double tubing set (tube 8 x12 mm) with
borosilicate glass Y-pieces |
101 020 |
| |
|
| Foot switch with connecting cable |
101 010 |
| |
|
| Filling nozzle for tube: 8 x 12 mm or 6
x 10 mm |
101 030 |
| |
|
|
| Accessories for preparation
of blood agar |
|
| |
|
|
| Tubing set |
For the preparation of blood agar (suitable
only if blood 5 to 7 % is added via the pump of the filling
unit).
Comprising:
- Single tubing set 6 x 10 mm and 8 x 12 mm
- Filling nozzle: 101 030
- Borosilicate glass T-piece: 179 098
- Suction needle stainless steel: 179 147
- Tubing set 2 x 6 mm: 179 030
|
101 040 |
| |
|
|
| Tubing set
|
For the preparation of blood agar (suitable
only if blood 3 to 10 % is added by the Dose-it pump via
the pump of the filling unit). Comprising:
- Double tubing assy incl. filling nozzle: 101 015
- Borosilicate glass T-piece: 179 098
- Suction needle stainless steel: 179 047
- Tubing set 4 x 7.2 mm: 177 089
|
102 181 |
| |
|
| Single tubing set 3 x 7 mm Ø, L
= 1.6 m, for 1-5 ml dosing volumes |
179 035 |
| |
|
| Glass T-piece |
179 098 |
| |
|
| Electrical interface for blood tubing
set for combination with Dose-it peristaltic pump/filling
unit |
102 180 |
| |
|
| Suction needle for stainless steel blood
set, standard |
179 147 |
| |
|
Suction needle for stainless steel blood
set for Dose-it,
inner diameter tube: 4 mm |
177 074 |
| |
|
|
|
| 3
Feeding unit |
| |
|
|
| Accessoires |
Conversion set for Feeder 200 in use with
stacking unit |
111 005 |
|
| 4 Embossing unit |
|
| |
|
|
| Accessories |
Sliding rail for dishes (long) |
107 115 |
| |
|
|
| |
Character height 3.5 mm. Maximum
type length available
72 mm |
|
| |
Individual characters with one number or one
letter as code,
length 3.5 mm
|
107 003
|
| |
|
|
| Printing face, 2 letters/digit = 7.0 mm |
107 006 |
| Printing face, 3 letters/digit = 10.0 mm |
107 009 |
| Printing face, 4 letters/digit = 12.0 mm |
107 012 |
| Printing face, 5 letters/digit = 17.0 mm |
107 015 |
| Printing face, 6 letters/digit = 17.0 mm |
107 018 |
| Printing face, 7 letters/digit = 25.0 mm |
107 021 |
| Printing face, 8 letters/digit = 25.0 mm |
107 024 |
| Printing face, 9 letters/digit = 25.0 mm |
107 027 |
| Printing face, 10 letters/digit = 30.0
mm |
107 030 |
| Printing face, 11 letters/digit = 30.0
mm |
107 033 |
| Printing face, 12 letters/digit = 30.0
mm |
107 036 |
| Printing face, 13 letters/digit = 30.0
mm |
107 039 |
| Printing face, 14 letters/digit = 30.0
mm |
107 042 |
| |
|
| Spacer - For the optical separation of
date, agar type and code, length 2 mm |
107 067 |
| |
|
| Spacer, with double line, length = 3.5
mm |
107 045 |
| Spacer, with double line, length = 7.0
mm |
107 048 |
| Spacer, with double line, length = 10.0
mm |
107 051 |
| Spacer, with double line, length = 12.0
mm |
107 054 |
| Spacer, with double line, length = 17.0
mm |
107 057 |
| Spacer, with double line, length = 25.0
mm |
107 060 |
| Spacer, with double line, length = 30.0
mm |
107 063 |
| Spacer, without double line, length = 3.5
mm |
107 066 |
| Spacer, without double line, length = 1.0
mm |
107 069 |
| |
|
| Embossing block - With agar designation e.g. blodd agar,
endo, MacConkey, Müller Hinton etc., length 33.5
mm |
107 044 |
| |
|
| Letter set, capitals only, A-Z |
107 070 |
| |
|
| Number set 0-9 |
107 071 |
| |
|
| Standard date set, comprising: 12 numbers 0- , of which
1 and 2 are double 12 months Jan-Dec and numbers for two
years: 02 and 03 |
107 072 |
| |
|
| as above - but english |
107 072 E |
| |
|
| Support rod - With end pieces |
107 080 |
| |
|
