EVOLVE Manual Pipettes
Set volumes in the blink of an eye instead of a twist of the wrist!
Traditional pipettes utilize a single rotating plunger to set the volumes. This approach makes frequent adjustment of volumes tedious, especially when switching from lower to higher volumes.
To overcome this pain point, the EVOLVE manual pipette has been designed with three adjustable dials to rapidly set volumes. This revolutionary approach reduces repetitive stress injuries and allows users to set volumes in a fraction of the time it takes with a traditional manual pipette.
How it works
The EVOLVE manual pipette features three adjustable dials to rapidly set volumes. This approach allows users to set volumes more than ten times faster than standard manual pipettes.
Quick Set Dials
Unlike traditional pipettes which utilize a single rotating plunger to set volumes, EVOLVE features one dial for setting each of three volume digits. This is the same convenient method used to unlock three dial combination locks.
Simply depress and twist the plunger to release spring tension from the volume dials. This allows users to freely adjust all dials in either direction. Once set, twist and return the plunger to the up position.
Volumes set on traditional manual pipettes can often change while pipetting due to unintentional plunger turns. The EVOLVE Quick Set Dial design prevents inadvertent volume drift due to plunger movements while pipetting.
GripTip pipette tips which never leak or fall off
GripTips are always firmly attached and perfectly aligned, regardless of how many side well touch offs are performed. You no longer have to hammer your pipette tips on or worry about pipette tips falling off!
2) O-RING SEAL
3) RIM SNAPS OVER THE LOBES
The rim (3) of the GripTips will snap over the Multi-Lobes (1), attaching firmly. As a result, GripTips will never accidently fall off.
A shoulder (4) provides a positive stop to prevent over-tightening of the tip. The GripTip can only be attached up to that point and no further, ensuring that all tips are at the same height. As a result, the tip is either on or off, but nothing in between.
Interchangeable Plunger Spring Assemblies
Two differently sized plunger springs allow users to customize the force needed to depress the plunger to their preference. The controlled plunger spring option allows users to slow the aspiration and dispense speeds resulting in improved pipetting technique and results.
The controlled plunger spring is compatible with all single channel EVOLVE pipettes except the 5 ml model. Changing the spring is completed in seconds.
INTEGRA Linear Stand
Storing pipettes upright is important to prevent liquid or debris from entering the tip fitting. Proper storage also extends the life of a pipette.
The INTEGRA linear stand is ideal for hanging EVOLVE pipettes up off the lab bench. Up to twelve manual pipettes can be placed on a linear stand. EVOLVE shelf hooks are also available for proper storage.
"My work is pipetting most of the day and I have at least 4 different brands of pipettes in my flow cabinet, but ever since I bought the Evolve pipettes the others are out of a job. They use the grip tips, which assure accuracy and they are so light to handle. Changing the volume is a breeze because each decimal has it's own easy to change dial. Using the 1 ml pipette for passing 200 clones won't wear out your hand and arm muscles. The 5 ml pipette , the one you didn't know you need until you have it, is a great addition to the set and the 20 ul pipette with its perfect 12.5 ul grip tip is the best I've ever used to pick colonies when doing a genetargeting project. There is honestly no reason to have any other brand once you have these."
St. Jude Children's Research Hospital
"Integra’s Evolve Manual pipettes are very handy to have around! I constantly need to change the setting of my pipette when performing testing in the laboratory (for instance, from 150 to 200 to 100 to 150 and then 80). This can get irritating, and also stressful, especially when there is a high workload and pressure for time. The dials for each number placement on the Evolve pipettes make changing volumes significantly faster and more convenient (which, in turn, decrease frustration levels). Working on a bench without one of these pipettes will never be the same again."
"During the workday, we have to stock our samples with internal standards and quality control samples with the analytes we are looking for. There are many changes in the volume setting of the pipette. With the Evlove manual pipette this work step is very fast, at least as fast or faster than we use a electric pipette. It takes a bit and it is necessary to exercise, but after a few days you have become accustomed to the setting and can handle everything with one hand."
LAVES LVI BS/H
See it work
Parts and numbers
EVOLVE Manual Pipettes
Single, 8 and 12 Channel EVOLVE Manual Pipettes
Single Channel EVOLVE Pipettes
Volume Range Part No. 0.2 – 2 µl 3011 1 – 10 µl 3012 2 – 20 µl 3013 10 – 100 µl 3015 20 – 200 µl 3016 100 – 1000 µl 3018 500 – 5000 µl 3019
Single Channel Starter Pack
3 Pipettes with Nominal Volumes Part No. 20, 200 and 1000 µl 3050
8 Channel EVOLVE Pipettes
Volume Range Part No. 1 – 10 µl 3022 5 – 50 µl 3024 10 – 100 µl 3025 20 – 200 µl 3026
12 Channel EVOLVE Pipettes
Volume Range Part No. 1 – 10 µl 3032 5 – 50 µl 3034 10 – 100 µl 3035 20 – 200 µl 3036
Multipurpose Tool, Shelf Hooks, Plunger Caps, Spring Assembly, Linear Stand
Description Part No. Multipurpose tool for calibration, O-ring removal and plunger spring exchange 3200 Shelf hook, 1/pack 3210 Shelf hook, 5/pack 3211 Plunger cap, black, 5/pack 3220 Plunger cap, purple (2, 10, 20 µl), 5/pack 3221 Plunger cap, yellow (50, 100 µl), 5/pack 3222 Plunger cap, green (200 µl), 5/pack 3223 Plunger cap, blue (1000 µl), 5/pack 3224 Plunger cap, orange (5000 µl), 5/pack 3225 Control spring assembly (for single channel pipettes 2, 10, 20, 100, 200 and 1000 µl only) 3230 Linear Stand, accommodates all types of INTEGRA pipettes. It can be converted to a charging stand by attaching up to four charging stations, see electronic pipettes. 3215
Red O-rings for tip fittings
Description Part No. 200/300 µl, replacement kit, 24/pack 100-00027-50 1000/1250 µl, replacement kit, 24/pack 100-00028-50 5000 µl, replacement kit, 10/pack 100-00029-00
GripTip Pipette Tips for INTEGRA Pipettes
GripTips in Racks
Tip Size Color Code For Pipettes Description Sterile Filter Sterile Non-Sterile 12.5 µl LONG Purple 2, 10, 12.5, 20 µl 5 racks of 384 tips 4405 4404 4403 12.5 µl Purple 2, 10, 12.5, 20 µl 5 racks of 384 tips 4415 4414 4413 125 µl Yellow 50, 100, 125 µl 5 racks of 384 tips 4425 4424 4423 300 µl Green 200, 300 µl 5 racks of 96 tips 4435 4434 4433 1250 µl Blue 1000, 1250 µl 5 racks of 96 tips 4445 4444 4443 5000 µl Orange 5000 µl racks of 48 tips 4455 4454 4453
GripTips in GREENCHOICE Refills
Tip Size Color Code For Pipettes Description Pre-Sterilized Non-Sterile 12.5 µl LONG Purple 2, 10, 12.5, 20 µl 5 inserts of 384 tips 4406 4402 12.5 µl Purple 2, 10, 12.5, 20 µl 5 inserts of 384 tips 4416 4412 125 µl Yellow 50, 100, 125 µl 5 inserts of 384 tips 4426 4422 300 µl Green 200, 300 µl 5 inserts of 96 tips 4436 4432 1250 µl Blue 1000, 1250 µl 5 inserts of 96 tips 4446 4442
GripTip Bulk Packs
Tip Size Color Code For Pipettes Description Sterile Non-Sterile 12.5 µl LONG Purple 2, 10, 12.5, 20 µl 1 bag of 1000 tips - 4401 12.5 µl Purple 2, 10, 12.5, 20 µl 1 bag of 1000 tips - 4411 125 µl Yellow 50, 100, 125 µl 1 bag of 1000 tips - 4421 300 µl Green 200, 300 µl 1 bag of 1000 tips - 4431 1250 µl Blue 1000, 1250 µl 1 bag of 500 tips - 4441 5000 µl Orange 5000 µl 1 bag of 250 tips - 4451 5000 µl Orange 5000 µl 1 bag of 100 tips, individually wrapped 4456 -
Disposable Reagent Reservoirs
Reagent Reservoirs for Multichannel Pipettes
10 ml Reservoirs for Multichannel Pipettes
(4, 6, 8 and 16 channel pipettes), low residual volume
Description Part No. Reservoir bases, 10 pack 4306 30 reservoirs individually sealed, sterile, 1 base per case 4331 Four sleeves of 50 reservoirs, 200 reservoirs per case, sterile, 1 base per case 4332
25 ml Reservoirs for Multichannel Pipettes
Description Part No. Reservoir bases, 10 pack 4304 30 reservoirs individually sealed, sterile, 1 base per case 4311 Four sleeves of 50 reservoirs, 200 reservoirs per case, sterile, 1 base per case 4312
100 ml Reservoirs for Multichannel Pipettes
Description Part No. Reservoir bases, 10 pack 4305 30 reservoirs individually sealed, sterile, 1 base per case 4321 Four sleeves of 50 reservoirs, 200 reservoirs per case, sterile, 1 base per case 4322