VIALAB Pipette Automation Software
Pipette Automation Software
Easy Setup of Automated Pipetting
Combining INTEGRA’s ASSIST PLUS pipetting robot with VIALAB software makes it easy to create automated pipetting protocols for a variety of applications. The intuitive visual interface helps you to create automated programs without any programming knowledge within a few minutes instead of hours.
How it works
Each VIALAB program consists of four parts: Material, Method, Simulation and Transfer.
Material: Simply pick and place labware
Choose the pipette and tips needed for your assay, then place labware – such as plates, reservoirs or tube racks – on the deck.
VIALAB includes a comprehensive labware library of over 100 plates, plus all INTEGRA reservoirs and tube racks. You can also define your own labware formats.
Method: Define your pipetting steps
Choose a predefined pipetting step, then adapt it to your needs. Select the correct volumes, source and target wells, then fine tune it by modifying pipetting speeds, heights, etc.
The software displays the liquid filling levels in each well to allow convenient adjustment of pipetting heights, and constantly validates your program in the background to avoid set-up errors.
The D-ONE single channel pipetting module’s liquid level detection feature eliminates the need for aspiration height adjustments. Worklist files can be imported for easy set-up of normalization or hit picking.
Simulation: Make a final check
Perform a final check of your program by watching it run on the screen. This shows pipetting locations, volumes transferred, pipetting heights and the movement of tips on the deck.
You can even speed up the simulation, giving you a quick overview to ensure your program represents your application.
Transfer: Send Your Program to the Pipette
Upload your completed program directly to the pipette via the communication module or USB. After the transfer is complete, no connection between VIALAB and the pipette is needed. The pipette controls the ASSIST PLUS instrument!
You can also connect ASSIST PLUS to a PC, and run and control it directly using VIALAB, without using the pipette’s user interface.
Report: Program report and Run log
Create a PDF report for your lab notebook or data filing, summarizing all labware, pipettes and pipetting steps in the program. Download a sample report here.
A run log is created when ASSIST PLUS is connected to a PC with VIALAB while the program is running for complete peace of mind. It documents the start and end time of each run, the serial number of the pipette and instrument, and records if any errors occurred during the run. If the D-ONE single channel pipetting module is used, it also reports if a liquid level was detected.
See it work
Uses and Applications
Parts and numbers
- Communication Options
Communication options for VIALAB pipette automation software
Description Part No. Pipette Communication Module for VIAFLO, VOYAGER and D-ONE 4221 Charging/communication stand for 1 pipette 4211 Charging/communication station 3218 Linear stand 3215 Mains adapter 3216